The 1988 Chevrolet Beretta catdumptruck.com | Whether you’re looking for a new car or you’re just considering upgrading your current car, the 1988 Chevrolet Beretta might be the vehicle for you.
This compact sedan has a lot to offer, from exterior styling to the engines it’s packed with. It’s a very practical, small sedan, and it has a very nimble handling package.
The 1988 Chevrolet Beretta
#0-60 MPH time of 9.2 seconds
During the late 1980s, Chevrolet developed a new compact car strategy. Their plan included a Corsica sedan and a platform-sharing coupe called Beretta. These two vehicles were built together, and they were sold alongside the J-Body.
Beretta was the first GM vehicle to have an aerodynamic design. It also had front wheel drive traction and a beam axle. Its interior featured a low HVAC control, noise, vibration, and an awkward dashboard.
In 1987, Beretta received a year of beta testing in rental fleets. It was also sold in a limited edition Indy model. It was the most early 1990s looking car ever manufactured.
The Beretta’s base engine was borrowed from the Cavalier. The 2.8-liter V-6 produced 130 horsepower. Its torque rating was 160 pound-feet. It was also available with a three-speed automatic transmission, but only on the GT model.
The Beretta was discontinued in the late 2000s. It was one of the aging segments in Chevy’s lineup. The last two model years saw a trim shuffle. The least expensive GTU sticker price was $15,174. The most expensive model had a $2,663 MSRP.
The Beretta GTU was a departure for Chevrolet. It featured a bodykit and unique “meat-slicer” wheels, and it was priced right in the Mustang LX territory. However, it was largely a graphics package and a body kit. It added to the $10,795 purchase price.
The GTU GT V6 had a racy bodykit and a unique rear spoiler. It was equipped with a three-speed automatic transmission and a four-speed manual.
It also had a suspension tune exclusive to the GTZ. It also had Goodyear Eagle VR55 tires. The Beretta GTU was a great car, but it didn’t have enough power to compete with the Ford Probe.
#0-60 MPH time of 0.84g on the skid pad
Taking the crown from the olde faithful, the Beretta echeque proved itself as a worthy competitor. It also helped that Chevrolet’s chief performance officer had a knack for making things run smoother than a taser on a puppy.
Aside from a slew of bling bling goodies, the echeque was one of the most affordable mid-level performance sedans in its class.
During its short tenure as the flagship of the Chevy brand, the GTU topped the charts for two model years. As a bonus, the company was able to keep a lid on the cost of the top notch performance – a feat unmatched by its competitors for many moons.
The echeque also boasted a slew of high-tech amenities like air conditioning and heated seats, making it a comfortable enclave in the suburbs.
The echeque also boasted some interesting kinks, namely a lack of a rear spoiler. The best thing to do was to do the research required to find out if Chevrolet was truly committed to the project. While it didn’t get off the ground on a high note, the company’s high-end flagship did prove the affliction.
The 1988 Chevrolet Beretta
#0-60 MPH time of 17.7 seconds
Getting from 0 to 60 MPH is the most common measure of how a car performs. This can be done by a number of different methods. The most accurate method is by using a Doppler radar gun. However, a calculator can be used to calculate a reliable 0-60 time for a low-powered car.
For 1988, GM offered two V6 engines. A 2.2 four-cylinder made 5 horsepower, while the larger 2.8 was rated at 160 ft-lbs. Both were paired with a five-speed manual or a three-speed automatic. The sluggish 2.2 was no match for the raucous 2.8, which was mated to a five-speed manual.
In 1993, the Beretta gained a new engine, the 3.1 V6. This V6 produced 10 horsepower, and it had the capability of going from 0 to 60 MPH in just under five seconds.
The Beretta was also the first aerodynamic design car from GM. Its interior had a spartan dash, with a low HVAC control. It also featured a roll-bar similar to the Cutlass Supreme convertible. It was a bit dated by today’s standards, but it was one of the cheapest imports. It was priced under the $10k mark, making it a cheaper option for Japanese sports coupe buyers.
While the HO Quad 4 wasn’t as powerful as the GM’s 3.1 V6, it was a high revving engine. It was a good choice for the Beretta. Fortunately, it also had the largest ft-lbs of all.
The slalom bested the 300ZX in terms of a 0-60 MPH time. The GM GTZ had a very smooth front grille, and it had an impressive suspension tune.
The omission of an automatic transmission killed sales. The racy GM GTU GT V6 was a great looking car, and the racy bodykit was a good looking thing to have.
Designed in the same design studio as the Chevrolet Camaro, the 1988 Chevy Beretta was a front-wheel-drive two-door coupe. It was built at the Linden, New Jersey assembly plant and shared mechanical components with the Corsica sedan.
The engine options for the base models included a 2.2 L OHV four-cylinder with 120 horsepower, a 90 hp 2.0L I4, a 2.8 L V-6 with 125 horsepower, or a 160 hp 3.1L V-6. An optional three-speed automatic transmission was available for the 2.8L V-6.
The sporty GTU and Z26 versions were available for 1988-1990. They were built on the GM L platform and featured a 2.8L V-6 with a 130-horsepower rating. They also came standard with GM FE7 performance suspension. They had 16×7-inch aluminum alloy wheels.
The Beretta was a popular car. It was an economical and fuel-efficient vehicle. It also sold for less than many competitors. The interior was comfortable and stylish. It was also very inexpensive to buy and maintain.
The 1988 Chevrolet Beretta was the first Beretta to be sold to the general public. It was sold through rental agencies and rental fleets.
The car was a little different from later models. It was one of the first GM vehicles to feature pull-down door handles. It also gained an upshift light and an AM/FM stereo radio with a digital clock.
In 1996, the last Beretta rolled off the assembly line. Despite its short lifespan, it was a successful car. It won the Trans Am Series championship in 1990.
It was considered to be the fastest front-wheel-drive car in the world. It was also the pace car for the 1990 Indianapolis 500. It was one of the best selling small cars of its time.
The 1988 Chevrolet Beretta
GM introduced the Chevy Beretta in 1988 as a two door coupe on the GM L platform. It was built in the Linden, NJ assembly plant, where the Corsica was also produced.
The Beretta was one of the company’s first aerodynamic design vehicles. The base coupe featured a 2.2-liter four-cylinder engine with 120 horsepower. It was coupled with a three-speed automatic transmission. The GTU featured aero body panels and FE3 suspension.
The GTU also had an optional, more powerful 2.8-liter V-6. The car’s most racy trick was a rear spoiler.
The Z26’s V-6 was a 3.1-liter unit that produced 155 horsepower. It had a sporty body kit, unique “meat-slicer” wheels, and ground effects.
The GT featured a 130-horsepower 2.8-liter V-6. It also had a firmer suspension and custom cloth trim. It was offered in both coupe and convertible variants. It came with air conditioning and an AM/FM stereo cassette player. It also had a split folding rear seatback.
There was an optional version of the GTU that featured an upgraded suspension and a swanky rear spoiler. The Indy model was a limited-production model that made a splash. It had a unique look, including a C&C logo on the hood. It was also a pace car for the 1990 Indianapolis 500.
The 1988 Chevrolet Beretta was also used as a spare car during the third IMSA championship in as many years. It was driven by Tommy Kendall. It was also the subject of some testing at the Dana Test Center in Ottawa Lake, Michigan. It also was one of three examples that were built by Peerless Engineering for Cars & Concepts.
The Beretta’s performance was impressive, but its sales didn’t match the hype. Eventually, production was canceled after a decade of production. It was replaced by the Chevy Malibu.
- GMC Dump Truck Parts - March 2, 2023
- GMC Dump Truck Models - March 2, 2023
- GMC Dump Truck Dealers - March 1, 2023